|
|
|||||||
| D2 - Wheels and Tyres Refurbing, center caps, tyre brands, tyrefitters - discuss it here |
|
|
Thread Tools | Display Modes |
|
#1
3rd October 2012, 02:17 PM
|
|||
|
|||
18x8 ET42 fit D2?
My QS wheels are a little run down and kerbed. Ideally they need a refurb, but I also have a cunning plan.
Back at my parents, sitting in their garden is a set of wheels which I had fitted to a previous car that are in far better condition. The wheels in question are RS6 replicas (yes I know), they are 18x8 with an offset of 42 and a PCD of 5x112. From what I can calculate I believe that they will stick 6mm further out that than the standard Sport alloys. Will this be to much I wonder, and since I will be transferring the current 245 wide tyres over am I likely to have rubbing issues?.
__________________
Manny 2004 A4 1.8T Sport Cabriolet, 89K Miles Past 2004 D3 A8 3.7 Quattro, Xenon, Bose, Blinds, Solar Sunroof, TV, ACC, phone and almost every option. 168K miles rising slowly with retrofit AMI and DVB-T in place of Analogue 2003 Volvo S60 D5 SE Manual, 197K miles. 2001 D2 A8 3.7 QS, Bi-Xenon, Bose, Blinds, Electric Everything, retrofitted RNS-D, 191K Miles 
|
|
|
Threaded Mode