![]() |
|
VCDS (aka Vagcom) For all your electronic debug / diag advice queries and mods. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Thanks for reply!
As for key-less issues seems like this is a common problem. I have seen on other Audi forums users complaining about it. I will bring the car this week to a highly recommended electrician working for Porsche Romania. Will keep you informed. |
#2
|
|||
|
|||
![]()
Update!
I have discovered that i am missing the memory buttons for driver seat. Since the car comes with memory seats according to ETKA and they are also present on the passenger side i am thinking that this could lead to errors for all Kessy antennas. Seems like someone removed the memory buttons in the past and now is just a simple black plastic cover in the place. Since the car cannot see the memory buttons anymore could lead to this error? I was about to order the kessy module plus steering column module but i would like to eliminate all possible ways before i order. Similar problem in the rear AC control. Car comes with ventilated seats for front and rear but in the rear the buttons allocated for ventilation are just simply plain black. The ones in the front are fine. So i am thinking at the same problem, since the rear AC control in the back is missing the command could lead to this errors. Who ever think that a car from Germany with full inspection service book with Audi dealer can have this dodgy job going on? |
#3
|
|||
|
|||
![]()
Do you have the fingerprint reader? If so, then you won't have driver memory buttons, they only came without the fingerprint scanner.
__________________
2010 Jag XF 3.0D Portfolio S I know.. I know.. |
#4
|
|||
|
|||
![]()
yes, i do have fingerprint scan. So, you mean to save the settings for each driver i have to create user under MMI?
|
#5
|
|||
|
|||
![]()
Exactly that.. so you won't have memory buttons, just the blanking plate.
Double check the module codings to make sure that it's set properly for that.
__________________
2010 Jag XF 3.0D Portfolio S I know.. I know.. |
#6
|
|||
|
|||
![]()
I have tried register myself as a user but i can only go till the moment "place the finger selected into the middle of fingerprint space". There is no message coming up or dirty sensor etc. The sensor is definitely clean. I deleted all previous users registered. What i am doing wrong?
__________________
S4 C4 Turbo Quattro |
#7
|
|||
|
|||
![]()
Pics
__________________
S4 C4 Turbo Quattro |
![]() |
|
|