A8 Parts Forum  

Go Back   A8 Parts Forum > General Natter > IT, AV and other Tech

IT, AV and other Tech All computing, home cinema and technology that isnt car related

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 16th October 2014, 01:39 PM
Goran's Avatar
Goran Goran is offline
Senior Member
 
Join Date: Feb 2011
Posts: 2,178
Default

yes the general rule of thumb is to not discharge them below 80% although several guys in the States on Rcgroups discharge them down to 3.0V which is close to 100% and apparently they haven't had any longevity issues. This is with a very low % of capacity current I'm guessing.

The 8Ah one should be able to deliver 3600x8x0.8/320 = 72 seconds of 320A
Although it wont live at 320A for long and may heat up and burst if used for too long at that sort of current. Starting a car should only take 5 sec max so it should be fine, unless the car asks for more current than 320A.

p.s. - Lipo only overheat if over discharged by a high current. I killed a few, one 850mah, with a low current of 3A all the way down to 0.0V with no drama, no heating at all.

Last edited by Goran; 16th October 2014 at 01:47 PM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:06 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.