22nd March 2024, 03:46 PM
|
|
Senior Member
|
|
Join Date: Jun 2013
Location: Londonderry, Northern Ireland
Posts: 2,985
|
|
Quote:
Originally Posted by ainarssems
I am wondering if it would be possible to remove the plastic flap, weld the broken arm, then securely reattach the plastic flap.
|
Just looking at the photos again, isn't it a very unusual part to break? I always thought that it was just the plastic flaps that deteriorated over time, got brittle and broke off. Although, you could say he was 'lucky' in that there was no way part of the arm and the flap were going to drop into the cylinder, unlike small bits of plastic.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts
My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts
Sold! 2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights
My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds
|