View Single Post
  #3  
Old 12th January 2019, 01:15 AM
steamship's Avatar
steamship steamship is offline
Senior Member
 
Join Date: Jun 2013
Location: Londonderry, Northern Ireland
Posts: 1,655
Default

Quote:
Originally Posted by homer simpson View Post
Original exhaust most likely has the flexy part welded on when it was manufactured. The ones in the link are designed to attach onto an exhaust pipe, not sure if there is room to chop yours and clamp these one
So it will be out with the measuring tape as well tomorrow.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts

My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts

Sold! 2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights

My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds
Reply With Quote