Quote:
Originally Posted by projektzwo
But would like to know if someone did this RNS-E fit to a pre-facelift A8 without even existing RNS-D (just radio/cassette)? Is it basically the same procedure or it is even more complicated?
|
Not familiar enough with the pre-facelift A8s but I think they use a 1-DIN format, whereas the facelift uses a 2-DIN format (basically the height of the unit), so fitting a RNS-E or even RNS-D might be more of a task.
Since you're new, pop along to the
Introductions section and introduce yourself AND your car to the rest of the forum. Photos are good too.
If you're planning on staying around, update your profile with your location and the spec of the car as it helps further down the line when you're asking questions. That way you don't keep getting asked the spec or we automatically assume you're in the UK. Oh, and welcome.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts
My DIY jobs -
Replaced alarm horn,
Replaced Coolant Temp sensor,
Updated RNS-D firmware,
Installed Reversing Camera and Digital TV,
Dashcam Installation,
Retrofitted Rear Blinds,
Auto-Dimming Rear View Mirror,
Chrome Boot Struts
Sold! 
2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights
My DIY jobs -
Fan Jet Windscreen Washers,
Retrofitted Electric Side Blinds