28th September 2023, 12:39 PM
|
 |
Senior Member
|
|
Join Date: Jun 2013
Location: Londonderry, Northern Ireland
Posts: 2,965
|
|
Quote:
Originally Posted by MikkiJayne
You could try shorting the pins on the connector to shut it up while you order a replacement.
|
Quote:
Originally Posted by Mossyboy1978
I haven't actually. I need to get a voltmeter and see if there is current.
Question is - if there isn't, where does that wiring go back to that might need to be checked? Fusebox? ECU?
|
Have you tried MJs suggestion of shorting the pins on the connector? i.e. short pins + warning disappears = wiring okay
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts
My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts
Sold!  2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights
My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds
|