Quote:
Originally Posted by RICKY D
Evening all, is anyone able to confirm my previous post before I start rooting around again.
|
Read through IT's post and also the one you quoted from HPsauce, as well as the post by Goran above (#102) with the photo. Since they're all referencing the blue and white wires, and you 'tried this hack', is it possible that the resistor you used is faulty, or not attached properly, depending on how you achieved it? Terrible thought, and I'm sorry to ask, but did you try clearing the code, as you don't mention it specifically? i.e. "I tried clearing the code, but it wouldn't".
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts
My DIY jobs -
Replaced alarm horn,
Replaced Coolant Temp sensor,
Updated RNS-D firmware,
Installed Reversing Camera and Digital TV,
Dashcam Installation,
Retrofitted Rear Blinds,
Auto-Dimming Rear View Mirror,
Chrome Boot Struts
Sold! 
2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights
My DIY jobs -
Fan Jet Windscreen Washers,
Retrofitted Electric Side Blinds