|
D2 - Body and Exterior Bumpers, bonnets, glass, trims - Everything outside |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Windscreen washer jet removal
I took my lower screen shuttle off the other day to clean it and discovered there had been a gorilla let loose on it, resulting in 2 broken clips and a missing drive spindle seal.
MJ miraculously had just 3D-printed said seals and kindly sent them by first class post, and A8 Parts provided a good scuttle. But I have to swap the water and electrics over and can’t work out how to separate the electrical connections from the washer jet body (see photo, taken from the back of the scuttle with the jet body popped loose). Any know how this is done?
__________________
2002 Final Edition S8. Ebony black with Silver Grey leather and myrtle wood trim. Current mods: solar sun roof, 20mm rear spacers, 15 mm on front, red brembo callipers, 6k headlights, rear view camera, engine remap, alloy dash dial rings, alloy navi rings, tt/phaeton pedal upgrade, (and custom matching foot rest) dension ipod interface & parrot hands free kit (both fully hidden), av input, tv in motion switched thro' PF switch in blanking plug right of steering column, Audi 'quattro' sill covers, repositioned centre console switches, radio clock, .Planned mods: auto-dimming rear view mirror, dash cam (as steamship's), fit the ski hatch, refit philips drl's (or maybe not - nope, definitely not - horrible botch!). |
|
|