|
D2 - Fuel and Exhausts Everything to do with getting fuel into the engine, and fumes back out again |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Inlet manifold Co flap broken off
Hi all
After replacing my knock sensor I was in the process of replacing the inlet manifold when I noticed something in cylinder 6 runner (see pictures). I have been chasing a slight miss fire / rough idle for a little while now and maybe this is it. I can't get the piece out and have checked the cylinder with an endoscope and can see no damage to the piston, cylinder walls or valves. It looks like I may have dodged a bullet there. What are my options? It's clearly a piece of the variable inlet runner and even though the manifold looks like it should split I doubt very much it's going to want to. Even if I could split it would I be able to get parts? Is this the correct part number? 077133185AS. Honestly guys, I'm getting really fed up with this car. I try to do everything I can to maintain her correctly using only genuine parts where I can and yet she just keeps constantly kicking me in the nuts. Whatever happens her is going to be expensive, I can just feel it. Thanks Frank
__________________
Audi S8 D2 2002 88k mls Ebony pearl effect black. Grey interior. |
|
|