![]() |
#1
|
|||
|
|||
![]()
Hi I was trying too change the blower motor at the bulkhead this is a nightmare has anyone a Wright on how to do and does anyone know where this sensor is from can't seem to find the correct place
|
#2
|
||||
|
||||
![]()
Check out the following threads. I've linked to the relevant post in each thread that gives the relevant details.
1. This one has photos and instructions: https://www.audiworld.com/forums/a8-.../#post25578377 2. This one just has some useful tips, especially tip #1: https://www.audiworld.com/forums/a8-.../#post25552188 3. Same thread as number two above, but this one just has pictures: https://www.audiworld.com/forums/a8-.../#post24768357 4. Finally, another one with just some instructions: https://www.audiworld.com/forums/a8-.../#post24184483 NOTE: Reading through these threads and a few others, it seems that they mostly fail due to worn out carbon brushes.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold! ![]() My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds |
![]() |
|
|