|
|
|||||||
| D2 - Interior Seats, dashboards, plastics, ventilation everything inside the cabin |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
4th April 2019, 07:18 PM
|
|||
|
|||
door pull retaining clip
well thats was a frustrating day, took the door panel off to figure out why the pin was dissapearing into the door when locked, only to fail on reassembly.
the belden cable that attaches to the interior door pull has it seems a tiny metal spring clip that holds it into the lever. or should I say, did, as it fired itself across the garage never to be seen again i'm not talking about the U shaped one that holds the cable to the door but a tiny thing thats surrounds the cable end and holds it into the rotating assembly anyone know if these are still available or have a part number? currently the door only opens from the outside which is frustrating as you can imagine 
|
|
#2
4th April 2019, 07:28 PM
|
||||
|
||||
|
Is this the culprit you're referring to, number 32 in the image? If so, MJ has a thread about 3D printing them. Last I remember, it was still in development.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold!  2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II HeadlightsMy DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds
|
|
#3
4th April 2019, 07:43 PM
|
|||
|
|||
|
Yeah they are NLA now. I 3D printed some prototypes but they needed a little work and then I broke the printer
 I have a new printer now though so I can have another go at them 
|
|
#4
4th April 2019, 07:48 PM
|
||||
|
||||
|
Seem to be in stock here:
https://www.ecstuning.com/b-genuine-...lip/4d0867646/ ... although shipping might be more expensive than the part. EDIT: And here: http://www.partsvp.com/products/CLIP...52d646%29.html
__________________
Mark ------------------------------------------------------ 2002 FE S8 Ebony Black Pearl ------------------------------------------------------  ------------------------------------------------------ Cars Owned: The Tesla Era: 2020 Model S Performance Ludicrous+ (present) (Black, with all black premium interior and carbon fibre décor, 21" sonic carbon twin turbine wheels and FSD capability) The Audi Era: '97 A8 4.2 (Ming Blue) --> '96 A8 4.2 QS (Dark Green) --> '02 FE S8 (present) The Citroen Era: '84 BX 1.6 RS --> '89 BX 1.9 DTR Turbo --> '94 XM 2.0L Turbo --> '96 XM 2.0L Turbo Exclusive --> '00 Xantia Activa 2.0L Turbo The Banger Era: '76 1.2L Lada VAZ-2101 (Ruski Fiat 124) --> '80 1.7L Morris Ital HL, finished in Ermine White and Rust
|
|
#6
4th April 2019, 08:43 PM
|
||||
|
||||
|
I tend to look here for parts:
http://e-acca.com/index.php?page=oem...orderBy=gruppa 28 cents, and shipping 'should' be less.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold! 2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II HeadlightsMy DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds
|
|
#7
4th April 2019, 09:33 PM
|
|||
|
|||
|
Quote:
|
|
#8
4th April 2019, 07:43 PM
|
||||
|
||||
|
I remember having a similar frustrating day working on a door of one of my previous 8s. Horrible fiddly job.
 steamship beat me to it with the part number ... There's a link to the illustration and the rest of the part numbers here: https://nemigaparts.com/cat_spares/e...8q/257/837300/ And a potential supplier in Belarus: https://nemigaparts.com/cat_spares/etka/part/4D0867646/ Quote:
__________________
Mark ------------------------------------------------------ 2002 FE S8 Ebony Black Pearl ------------------------------------------------------ ------------------------------------------------------ Cars Owned: The Tesla Era: 2020 Model S Performance Ludicrous+ (present) (Black, with all black premium interior and carbon fibre décor, 21" sonic carbon twin turbine wheels and FSD capability) The Audi Era: '97 A8 4.2 (Ming Blue) --> '96 A8 4.2 QS (Dark Green) --> '02 FE S8 (present) The Citroen Era: '84 BX 1.6 RS --> '89 BX 1.9 DTR Turbo --> '94 XM 2.0L Turbo --> '96 XM 2.0L Turbo Exclusive --> '00 Xantia Activa 2.0L Turbo The Banger Era: '76 1.2L Lada VAZ-2101 (Ruski Fiat 124) --> '80 1.7L Morris Ital HL, finished in Ermine White and Rust Last edited by moltuae; 4th April 2019 at 07:51 PM.
|
|
|
|
Hybrid Mode
