![]() |
|
D3 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Hi just got this fault and I have checked the wiring around the compressor but didn't find any wires broke and the harness plug was cleaned but fault won't clear is it time for a new compressor or is there any way of checking for faults.
Thanks trevor Last edited by carmel120; 18th March 2023 at 11:36 AM. |
#2
|
||||
|
||||
![]()
Found similar posts elsewhere and two stood out that you might already have seen. You've checked the wiring at the connector end and the connector itself, but I saw these the following comments that are worth investigating, both being broken wires:
I was able to fix my issue with N111, wire was pinched in the wheel well. 1st time I removed the sheild and the compressor as mine was broken way up where it goes into the main loom. Also worth doing a resistance check as mentioned in this post: https://forums.ross-tech.com/index.p...71/post-256551
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold! ![]() My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds |
#3
|
|||
|
|||
![]() Quote:
Cheers Sean 🍻 |
![]() |
|
|