![]() |
|
D4 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Hi all.
Can anyone tell me or point me towards the front hub bolt torque please? Its for the bolt that goes into the end of the driveshaft. I have a feeling its about 140lb/ft +180 degrees but could do with the correct data, Thanks Steve.
__________________
2010 D4 SE Executive 4.2 TDI |
#2
|
||||
|
||||
![]()
Pretty much spot on. According to the following PDF in the 'D4 Technical Info' section, it's 200Nm + 180 degrees:
28-Service Manual Running gear front-wheel drive and four-wheel drive.pdf
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold! ![]() My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds |
#3
|
|||
|
|||
![]()
Yet again, thanks Sean!
__________________
2010 D4 SE Executive 4.2 TDI |
![]() |
|
|