View Single Post
  #8  
Old 14th July 2025, 08:52 AM
steamship's Avatar
steamship steamship is offline
Senior Member
 
Join Date: Jun 2013
Location: Londonderry, Northern Ireland
Posts: 3,245
Default

Quote:
Originally Posted by Horrgakx View Post
Csn I ask what you did with the wire though? The sensor looks like it comes complete with wire and plug at the other end. I think it goes into a bank of plugs somewhere under the right side airbox...?
The OP can't respond as they were banned several years ago. The O2 sensor does indeed come with a plug on the end. In terms of the question you asked, and location, I've already detailed this in your other thread:

https://forum.a8parts.co.uk/showpost...19&postcount=6

If you use the PDF as instructed, it also shows where the individual sensor wires go to, and their route. Even without that, all you have to do is lay out the new one along the same route before removing it at either end.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts

My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts

Sold! 2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights

My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds
Reply With Quote