A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D2 > D2 - Engine Bay

D2 - Engine Bay Everything under the bonnet

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 3rd October 2023, 09:04 AM
strummagnet strummagnet is offline
Senior Member
 
Join Date: Jul 2011
Location: Gosport
Posts: 429
Default

I am having to replace my radiator and note that it can be done without the front end being removed, and as I have small hands I think that may be an advantage? :

Quote:
Originally Posted by MikkiJayne View Post

A new radiator can be fitted without pulling the whole front end off, but its not the easiest job as you have to disconnect the power steering cooler which is messy. Usually the mounting bolts are seized so make sure new mounts are ordered at the same time. Often the snap nuts on the radiator shrouds are also seized so replace those too. I would advocate a genuine radiator or a Valeo if you can find one. The fitment on the Nissens is terrible.
Is there fluid loss from the PS cooler? This being the messy bit?

I cannot find a genuine (local ish) and not a Valeo either. Have seen a few MAHLE units online, would these be a good bet?

Also as I will be doing this on the drive is it best to put the car up on ramps for the underneath work? Will it affect the 'syringe' technique when refilling the ATF?
__________________
Paul
Gosport UK
________________________
Polestar 2 Long Range
Audi S8 2002 https://forum.a8parts.co.uk//showthread.php?t=16187
Honda Jazz
Harley Low Rider 107 Stage 2
Harley Sportster 1200
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:08 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.