#1
|
|||
|
|||
Aux belt tensioner
Evening all,
So it appears the A8 has destroyed its aux belt tensioner. The car lost power steering mid-turn, parked up and found the aux belt sitting on top of the engine. I have checked the workshop manual, but I can't find any diagrams for the removal of the tensioner. Is this the case of a few bolts and it lifts out or is it more involved? Engine code is AKC Thanks James |
#2
|
||||
|
||||
There are two tensioners, so I've highlighted the bolt in each to remove.
I got all my information from the following PDF in the D2 Tech dump thread. As you say, removal is just by undoing a single bolt, but use the PDF for torque settings: Service Manual 8-cylinder engine (3.7 ltr & 4.2 ltr 5-valve AQF, AQG, ARU, AUW, AVN, AVP, AKC, .pdf
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold! 2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds |
|
|