A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D3 > D3 - Interior Electrics

D3 - Interior Electrics Airbags, Sensors, climate modules, instrument clusters, switches etc

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #29  
Old 15th February 2015, 09:50 AM
snapdragon snapdragon is offline
Senior Member
 
Join Date: Nov 2011
Posts: 1,669
Default

It's OK, I like that. Yes, I was trying to plug it in blind and had a sinking feeling as it was obvious the connectors were a mismatch Grrrr!
But then on closer inspection it was a blanking plug with Audi logo and numbers on it. This was on the pigtail hanging from the new cluster - as though this connector was not used on the donor car. All I can think is that on later cars with MMI 3G, there is a different cable to the 0.0 & CHECK buttons that connects to somewhere other than the cluster.
Maybe the MMI? I know the SETUP button is gone from the HVAC on those as the MMI3G has the HVAC setup as a menu instead. I was wondering if CHECK had moved there too with the service info.

***EDIT - I'm now thinking it is just the plug's housing, it must have split/broken and been left inside the socket.

Last edited by snapdragon; 15th February 2015 at 06:00 PM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:22 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.