Quote:
Originally Posted by mattylondon
Mannyo,
Did you ever find a solution for the component protection with the DSP-Amp?
Code:
Address 47: Sound System Labels: 4E0-910-223.lbl
Part No SW: 4E0 910 223 P HW: 4E0 035 223 A
Component: DSP-Amp.-High H00 0460
Serial number: qm
Coding: 0000017
Shop #: WSC 02313 785 00200
VCID: 2A5B1BAF85ED254EE53-807F
1 Fault Found:
02084 - Component Protection
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
I ask because I have the same fault after updating MMI to 5150. Also, I don't know if this is connected to the above, but when listening to any music (radio, AMI, CD) the volume does not lower or raise automatically with background noise. Previous to the update the volume would be adjusted to the background noise. It was a good feature and would like it back somehow. |
No, I still have that fault code since upgrading. The volume does still adjust to background noise, at least it does on 5750. The adjustment is certainly more subtle and less noticeable than on the earlier firmware, but it does adjust.
__________________
Manny
2004 A4 1.8T Sport Cabriolet, 89K Miles
Past
2004 D3 A8 3.7 Quattro, Xenon, Bose, Blinds, Solar Sunroof, TV, ACC, phone and almost every option. 168K miles rising slowly
with retrofit AMI and DVB-T in place of Analogue
2003 Volvo S60 D5 SE Manual, 197K miles.
2001 D2 A8 3.7 QS, Bi-Xenon, Bose, Blinds, Electric Everything, retrofitted RNS-D, 191K Miles
|
13th July 2014, 08:34 PM
Threaded Mode