|
|
|
|
#1
28th February 2023, 10:29 AM
|
|||
|
|||
It looks like the centre part with terminals is still intact, just the outer shell is missing, so there shouldn't be any need for wiring.
I do have spare connectors, but its probably easier to get a wiring cut from someone stateside and then dismantle the connector. Or, cable tie / hot glue it together 
|
|
#2
28th February 2023, 03:48 PM
|
||||
|
||||
|
Quote:
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold!  2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II HeadlightsMy DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds
|
 |
|
|
Hybrid Mode
