Exhaust pipe trims

[M-A8]

Originally Posted by B17NKA

They are awesome,the carbon looks amazing,definitely on the to do list
How do I get the main beam lights to work separately from dipped,I have just fitted a quality hid light set,led number plate lights,I fitted whiter brighter main beam bulbs and tried several sets of led side light bulbs but all kept putting error on dash even with extra resistors ? And all supposed to be can bus error free ?

Are your lights Xenon or Bi-Xenon
If Xenon and main halogen then sorry, my fault, you wont be able to do LED DRLs.

The best Halogen bulbs are MTEC Super White ONLY (55W or 100W), or HOEN from USA only.
Trust me, I've spend hundreds of pounds on testing most H7s on the market.
Still have MTECs on the fogs, they are really really good mate.

The only way you can get 501s side lights working without the error is if you fit 10W resistors with heatsink
No other way
http://www.hids-direct.co.uk/10w-res...-233-h6w-433c/

This fella (link above) sells MTECs as well.

Never trust Error Free 501 bulbs, there is not a single bulb on the market around the globe which would work on D3s without additional errors.
There is certain type also which will last a long time and wont fall into pieces because of the heat.

I'm off to shop, I'll be back in 20 so fire up if you have more questions.