TPMS code out?

[The_Laird]

Can I code out the tyre pressure monitoring system on my Audi TTS (2008)? One of the sensors has gone and I don’t want to replace it until the next tyre change, but the warning light is annoying!

[steamship]

You have access to VCDS, so this should work:

1. Go into Address 17 (Instruments)
2. Go into Adaptation
3. Go to channel 061
4. Make a note of the current value e.g. 3843

I can't test this, but I'm hoping VCDS provides a yellow speech bubble with the associated values that you can add or subtract.

5. Subtract 512 from current value e.g. 3843-512=3331
6. Enter new value into field and click on the Test button
7. If it accepts that, click on Save
8. Exit out of VCDS.

Start car and check if light off.

[The_Laird]

Thanks Sean, I’ll give that a try. Happy New Year!