![]() |
|
D4 - Body and Exterior Bumpers, bonnets, glass, trims - Everything outside |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
It's also worth checking out the following thread which has a lot of associated PDFs for the D4:
https://forum.a8parts.co.uk/showthread.php?t=8379
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold! ![]() My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds |
#2
|
|||
|
|||
![]()
Ta
![]()
__________________
A8L W12 (D4 2015) |
#3
|
|||
|
|||
![]()
Has anyone fitted the clips on the front grille? Looking at mine I think it's going to be impossible to get behind there to install the clips...
![]()
__________________
A8L W12 (D4 2015) |
#4
|
||||
|
||||
![]()
Didn't realise there was a mesh behind the main grille. The instructions don't mention it, but I would think that they could be fitted from the front, so long as you don't drop them.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold! ![]() My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds |
#5
|
|||
|
|||
![]()
I'm not so sure, looks like I need to get behind there. I wonder how easy it is to get the grill off....
__________________
A8L W12 (D4 2015) |
#6
|
||||
|
||||
![]() Quote:
Even by Audi standards, I don't think they require a full disassembly to fit a badge.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold! ![]() My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds |
#7
|
|||
|
|||
![]()
Update 29/7/24
I bought the W12 front badge ![]() Worth noting is that the badge looks very different to that displayed on page 336 - the one I have has 2 long "legs" which go through the grille, at least an inch long. It's this item here; https://www.ebay.co.uk/itm/266129152...mis&media=COPY I'll see what happens over the next few days, if I can I'll take photos. But I'm the worlds most impatient person when it comes to this and I tend to prefer giving the job to a garage ![]()
__________________
A8L W12 (D4 2015) Last edited by Horrgakx; 29th July 2024 at 11:54 AM. |
![]() |
|
|